Dymo SE450 Manuale Utente Scaricare il pdf (Pagina 5)

Installing as a Serial ASCII Printer (Windows)

1 Plug the end of the serial cable with the RJ11 connector

into the serial port on the bottom of the printer. See

Figure 3.

2 Connect the 9-pin serial connector to an available serial

port on your computer or device, as appropriate.

3 Plug the power cord into the power adapter.

4 Plug the power adapter into the power connector on the

bottom of the printer.

5 Insert the cables through the cable channel.

6 When all the cables are connected, plug the power cord

into an electrical outlet.

7 Configure the printer port with the appropriate settings.

The printer default settings are:

Baud Rate: 9600

Data Bits: 8

Stop Bits: 1

Parity: None

Follow the instructions in "Loading Labels" on page 6 to correctly load labels onto the spool and

insert the spool into the printer.

USB

10101 24VDC

Figure 3

10101

24VDC

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Dymo SE450 Manuale Utente Pagina 5