Dymo LABELWRITER 330 Manuale Utente Scaricare il pdf

Using the DYMO LabelWriter 330

Installing the Dymo printer:

The first time you use the Dymo printer you need to install the software using the CD

that is included. Please do not connect the Dymo printer to the computer until asked to

do so in the software installation.

1. Close all applications on your computer.

2. Insert the CD into your CD-ROM drive. After a few seconds, the installation

screen appears. If the installation screen does not appear:

a. Click Start and then Run on the Windows taskbar. The Run dialog box

appears.

b. Enter D:\install.exe (assuming D is the letter assigned to your CD-ROM

drive) and click OK.

3. Select the language version you wish to install and then follow the on-screen

instructions.

Connecting the Dymo printer:

At some point during the software installation you will be asked to connect your Dymo

printer to the USB or serial port.

1. To connect the power, plug the power cord into the power adapter.

2. Plug the power adapter into the power connector on the bottom of the printer.

Make sure to push the plug in completely.

3. Plug the other end of the power cord into a power outlet.

4. Plug the USB cable into the USB port on the bottom of the Dymo printer.

5. Insert the power and USB cables into the cable channel and set the printer down

on your work surface.

6. When prompted during the software installation and while the printer is turned on,

plug the USB cable into an available USB port on your computer.

Loading the labels:

You can only use thermal printer labels with the Dymo LabelWriter. They can be

purchased through Brodart – # 30319002, $36.00/roll, 750/roll, size 1” x 1.5”.

1. Open the top cover and remove the label spool.

2. Hold the spool spindle in your left hand and place the label roll on the spindle so

that the labels feed from underneath.

3. Place the spool guide on the right side of the spool and adjust it to fit snugly

against the roll.

1 2 3

Sommario

Pagina 1

Using the DYMO LabelWriter 330 Installing the Dymo printer: The first time you use the Dymo printer you need to install the software using the CD th

Pagina 2

4. Insert the label spool into the slots in the printer cover. The printer will feed the labels, stopping at the end of the first label. If the pri

Pagina 3

4. Scan in the barcode of the book you wish to print a label for. 5. A window will pop up displaying what your label will look like. 6. You can

Commenti su questo manuale

Nessun commento

Dymo LABELWRITER 330 Manuale Utente

Navigare online o scaricare Manuale Utente per Stampanti per fotografie Dymo LABELWRITER 330. Dymo LABELWRITER 330 User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Stampanti per fotografie Dymo LABELWRITER 330